Tempered UV glass protects a significant part of the curved screen, has a surface hardness of 9H, making it extremely resistant to scratches even when in contact with sharp objects, and is additionally coated with an oleophobic layer, which reduces the amount of fingerprints.
The UV model is glued using a liquid substance across the entire surface of the screen and then cured with a UV lamp. Thanks to this combination, we achieve an ideal effect of smoothness, clarity, and responsiveness.
Installation is simple and pleasant for the user.
A protective film is applied to the glass.
Installation Instructions:
- 1) Start the installation of the glass in the bathroom right after bathing - the steam absorbs all the dust from the atmosphere and will not interfere with the installation.
- 2) Thoroughly clean and degrease the surface of the screen, then dry it with a cloth and polish it to a shine.
- 3) Seal the speaker using tape from the kit.
- 4) Connect the UV lamp using a type C cable to a power source.
- 5) Pour the liquid into the very center of the device.
- 6) Install the glass as tightly as possible; this step can also be adjusted before curing the surface when the liquid is on the screen with the glass.
- 7) If an air bubble appears, use a card (for example, a credit card) and gently push it out of the glass; perform this action before curing.
- 8) With the UV lamp, cure the glass along the center at five points for 15 seconds and then around the edge for about 10 seconds.
- 9) Clean the phone from any residue of the hardened adhesive.
- 10) If your device has a fingerprint reader on the screen, remove and re-add the fingerprint after installing the glass.
- 11) Enjoy your well-done work!
Product Features:
- 100% original
- Packaged in original packaging
- Tempered glass with a thickness of 0.3 mm
- Scratch resistance 9H
- Equipped with an oleophobic coating
- Leaves no traces after removal
The set includes:
- 1 x UV glass
- 1 x UV lamp (without type C cable)
- 1 x Tube with adhesive
- 1 x Installation kit